Percentage Calculator & CGPA to Percentage Converter

Last updated: 11 November 2026 | By Pratham Shetty

Quick answer: Percentage = marks obtained ÷ total marks × 100. To convert CGPA to percentage, use the formula your own board or university prescribes. The most common ones are CGPA × 9.5 (the CBSE formula) and CGPA × 10. So 8.2 CGPA is 77.9% by the first and 82% by the second. Pick the right formula below and the calculator does the rest, in both directions.

Percentage & CGPA Converter

Marks to %, CGPA to % and % to CGPA, for job application forms.

Application forms love one box: “Percentage of marks”. If your marksheet shows a CGPA, that box becomes a problem. In my years of screening applications, this is the field with the most errors. One candidate multiplies by 10, another by 9.5, a third writes the CGPA itself. Then the minimum-percentage filter runs, and people who were actually eligible get dropped, while others get through and are caught at document verification. A two-minute check of the correct formula avoids both.

Marks to Percentage

The basic formula never changes:

Percentage = Marks obtained ÷ Total marks × 100

If you scored 412 out of 500, that is 412 ÷ 500 × 100 = 82.4%.

Which subjects to count

  • All subjects is the default for most job forms, including any additional subject, unless the notification says otherwise.
  • Best of five is used by some boards and institutions. Use it only if the form or notification clearly allows it.
  • Aggregate of all years or semesters is usually what “graduation percentage” means: total marks obtained in all semesters divided by total maximum marks, not the average of each semester’s percentage.

That last point matters. If semester one was out of 400 and semester two out of 600, simply averaging the two percentages gives a wrong answer. Add all marks obtained, add all maximum marks, then divide.

CGPA to Percentage

There is no single national formula. Each board and university decides its own, and prints it on the marksheet, transcript or a separate conversion certificate. The common ones on a 10-point scale are:

FormulaWhere you will see it8.2 CGPA becomes
CGPA × 9.5CBSE Class 10 results issued under the CGPA system, and several universities that adopted the same factor77.9%
CGPA × 10Many universities and institutes on a 10-point scale82%
(CGPA − 0.75) × 10Used by some technical universities, VTU being the best-known example74.5%
University’s own multiplierPrinted on your marksheet or conversion certificateVaries

Look at the last column. The same 8.2 CGPA can be 74.5%, 77.9% or 82%. On a form with a 75% or 80% cut-off, that difference decides whether you are eligible. This is why you should never borrow a friend’s formula from another university.

Why 9.5?

When CBSE used CGPA for Class 10, it explained that the 9.5 factor came from the average marks of students who had scored in the top grade band. It was a board-specific figure. Using it for an engineering degree from a university that prescribes a different formula is simply incorrect.

Percentage to CGPA

Some forms, especially private company portals, ask for CGPA even if your university gave marks. Reverse the formula: divide the percentage by the multiplier. With the ×10 rule, 78% becomes 7.8. With the 9.5 rule, it becomes 8.21. State which scale you used if the form has a remarks box.

What to Write on a Job Application

  1. Read the instructions first. Government notifications often say: “Candidates with CGPA must convert it as per the formula of their university.” Some say that if the university has no formula, CGPA should be multiplied by a given factor. Follow that line exactly.
  2. Keep proof. If your marksheet does not print the formula, get a conversion certificate from the university or download the official circular. You will be asked for it at document verification.
  3. Do not round up. 59.96% is not 60%. If the cut-off is 60%, you are below it. Most notifications say this in plain words.
  4. Use two decimal places. Write 77.90, not 78.
  5. Be consistent. The figure on your resume, application form and verification documents must be the same.

Division and Class

Many forms also ask for division. A common pattern is first division at 60% and above, second from 50% to below 60%, third from 40% to below 50%, and distinction at 75% and above. Your board or university may draw the lines differently, so write the division printed on your own marksheet. The calculator shows the common range only as a guide.

Worked Examples

  • Class 12 marks: 438 out of 500 → 438 ÷ 500 × 100 = 87.6%.
  • Graduation, six semesters: 3,264 obtained out of 4,800 → 68%.
  • CBSE Class 10 CGPA 9.2: 9.2 × 9.5 = 87.4%.
  • University on ×10 rule, CGPA 7.46: 74.6%.
  • University on (CGPA − 0.75) × 10, CGPA 7.46: 67.1%.

Applying for a government post? Check your age eligibility too with the age calculator for government jobs.

Related on Udhar Guide

Frequently Asked Questions

1. How do I calculate percentage of marks?
Divide marks obtained by total marks and multiply by 100.

2. How do I convert CGPA to percentage?
Use the formula prescribed by your board or university. CGPA × 9.5 and CGPA × 10 are the most common.

3. Is CGPA × 9.5 valid for every university?
No. It is the CBSE formula. Universities set their own, so check your marksheet.

4. What is 8 CGPA in percentage?
76% with the 9.5 formula and 80% with the ×10 formula.

5. What is 7.5 CGPA in percentage?
71.25% with the 9.5 formula and 75% with the ×10 formula.

6. How do I convert percentage to CGPA?
Divide the percentage by the multiplier your institution uses, for example 78 ÷ 10 = 7.8.

7. Where can I find my university’s formula?
On the back of the marksheet, in the transcript, in the academic regulations, or through a conversion certificate from the examination section.

8. Can I round 59.5% to 60% on a form?
No. Recruitment bodies do not allow rounding up to meet a cut-off.

9. Should I average my semester percentages?
No. Add marks obtained in all semesters and divide by the total maximum marks.

10. What is the difference between SGPA and CGPA?
SGPA is the grade point average of one semester. CGPA is the cumulative average across all semesters completed.

11. Does this work for a 4-point GPA?
The CGPA options here are for a 10-point scale. For other scales, use the conversion issued by your institution.

12. Do companies accept converted percentages?
Yes, when you use your university’s official formula and can show proof of it.

13. Which marks should I use if I improved a paper?
Use the marks on your final consolidated marksheet.

14. Does the calculator save my marks?
No. Everything runs in your browser.

Right Formula, Exact Figure

The maths here is easy. The risk is in choosing the wrong formula or rounding a number that should not be rounded. Find the conversion rule on your own marksheet, enter your figures, and write the result on every form exactly as shown. That keeps your application safe at both the screening and the verification stage.